OutBack Power 60 AMP DC Panel Mount Circuit Breaker PNL-60-DC - FREE SHIPPING!

Description

CIRCUIT BREAKER, 60A 150VDC, 1-POLE, PANEL MOUNT, OUTBACK PNL-60-DC
NOTE: AS OF 11/17/2017, THIS BREAKER HAS BEEN REPLACED BY THE MIDNITE SOLAR MNEDC-60.
THE MNEDC-60 IS AN EXACT REPLACEMENT FOR THE OUTBACK PNL-60-DC.  THERE IS NO DIFFERENCE BETWEEN THE TWO BREAKERS.  ALL SPECS ARE THE SAME.  WHEN ORDERED, YOU WILL RECEIVE THE MNEDC-60.
PNL-60-DC: 60 Amp, 150VDC, 1/4” stud terminals, Width is 0.75" or 19mm
The panel mount breakers are 3/4" wide and just under 1.5" tall (1.438" height at switch point opening). They come with two mounting screws and mount to the panel on the front side. The mounting screw holes are spaced at 2.062" apart on center. The total depth of the breaker is 2.525" from the front mounting screw to the back edge of the wire mounting lug.  Reference dimensional diagrams in listing photos for details.
The breakers mount to your existing panel mount breaker enclosure.  If you need an enclosure for these breakers, please see our separate listing for the Midnite Solar QUAD Panel box enclosure.
The MNEDC-QUAD enclosure is already set up with the knockouts and front mounting holes pre-drilled for up to (4) of the panel mount breakers. See our separate listing for the QUAD box.
Specifications:
Front panel mount, single pole with stud terminals on the back. Ring terminals required.
PNL-60-DC: 60 Amp, 150VDC, 1/4” stud terminals, Width is 0.75" or 19mm
Manufactured by Carling Technologies.
Product Highlights
Panel mounted hydraulic-magnetic type breakers
Rated for 100% continuous duty cycle
Not affected by high ambient temperatures
Non-polarized for use in any wiring orientation
Can be used for input, output or load circuits
Descriptions
Item will normally ship within 12-24 hours or less after cleared payment.
Free First Class Shipping Delivers your purchase USUALLY in 2-4 days to any of the 50 United States of America OR IT"S PROVINCES!